Translations:GeoLink Altidude Limit/38/en
From Spirit System Manual
Revision as of 14:52, 15 September 2022 by FuzzyBot (Talk | contribs) (Importing a new version from external source)
- To engage with Stabi function - in this case the feature is engaged when programmed Stabi function is engaged. This mean you do not need to assign any other switch than when used for e.g. Stabilisation mode. [LESS CHANNELS ARE USED]
- To engage with assigned GeoLink channel - it is required to assign F: GeoLink Altitude Limit function in the General/Channels to an available channel. [EASIER TO SET UP]
