Spirit RX Wiring

1 Wiring

1.1 Spirit GT

Spirit GT unit require only a direct cable between RUD port and port 2 X of the Wave receiver.

1.2 Spirit W1

Spirit W1 unit require only a direct cable between T1 port and port 2 X of the Wave receiver.

1.3 Spirit 1, Spirit 2, Spirit Pro, Spirit RS, Spirit GTR, microSpirit

You will need JETI Integration Cable connected at the RUD port (Red and Brown wires) + AIL pin (Orange wire) at the Spirit side, while second end of the cable must be connected at the port 2 X of the Wave receiver.