3DMaster mode
From Spirit System Manual
Revision as of 13:34, 31 March 2026 by Admin (Talk | contribs) (Created page with "3DMaster mode is key for achieving the best performance from Spirit for all those that wish to fine tune their models to superb characteristics. There is no compromise anymore...")
3DMaster mode is key for achieving the best performance from Spirit for all those that wish to fine tune their models to superb characteristics. There is no compromise anymore in flight performance. Everything can be tweaked to the greatest detail.
Main features are:
- Parameters can be configured separately for each axis (Gain, Rate, Feed Forward)
- Access to PID Regulation
- Swashplate parameters are extended
Enabling 3DMaster mode
In the Spirit Settings you can turn it on at the Advanced menu/Expert/Other page. Starting from 4.0.3 version 3DMaster mode is available for all Spirit units.
