Futaba
From Spirit System Manual
Revision as of 15:39, 9 January 2017 by Spiritdm (Talk | contribs) (Created page with " <div id="up"></div> <div align=center><font size="6"> Setup guide</font></div> <div align=center><font size="5"> for</font></div> <div align=center>T8FG or compatible </div>...")
Setup guide
for
T8FG or compatible
✔Flight Modes
✔Gyro Gains
✔Normal (Rate) mode
✔Rescue and Stabiilsation
✔Bank Switching
Flight style setup
Go to MDL → CONDITION
- Set the Flight mode switch SE for IDLEUP1 and IDLEUP2.
- Make sure that ON/OFF for IDLEUP1 is configured in the following way:
- OFF
- ON
- OFF
- For IDLEUP2 it should be as following:
- OFF
- OFF
- ON
- IDLEUP3 will be used for the Rescue/Stabilisation modes. For this purpose we will create special flight mode that will be activated when momentary switch SH is pressed.
