Futaba
From Spirit System Manual
Setup guide
for
T8FG or compatible
✔Flight Modes ✔Gyro Gains ✔Normal (Rate) mode ✔Rescue and Stabiilsation ✔Bank Switching
Flight style setup
Go to MDL → CONDITION
- Set the Flight mode switch SE for IDLEUP1 and IDLEUP2.
- Make sure that ON/OFF for IDLEUP1 is configured in the following way:
- OFF
- ON
- OFF
- For IDLEUP2 it should be as following:
- OFF
- OFF
- ON
- IDLEUP3 will be used for the Rescue/Stabilisation modes. For this purpose we will create special flight mode that will be activated when momentary switch SH is pressed.
