View source for Spirit Wave ESC Integration

Spirit Wave is able to configure supported ESCs directly though Modern User Interface.
This mean that not only Telemetry values can be seen at Display but additionally pilot can access also particular ESC settings and change them.

== Supported ESCs ==

Supported ESCs are subject of a firmware version. With following updates more ESCs will be suppported.

Presently following ESCs are fully supported:

* YGE LVT/HVT series
* HobbyWing v5 series

== Wiring ==

=== YGE LVT/HVT ===

Wiring is identical as for a standard ESC telemetry support with Spirit units. Please visit [[YGE_Telemetry|YGE Telemetery]] page.

=== HobbyWing v5 ===

Wiring is identical as for a standard ESC telemetry support with Spirit units. Please visit [[HobbyWingV5_Telemetry|HobbyWing v5 Telemetery]] page.

'''Requirements:'''
* Spirit Wave firmware: 1.0.20
* Spirit firmware: 3.7.3

== Setup ==

For enabling the Integration you have to enter '''Model - ESC - Type''' page.

[[File:wave-esc-setup.png|550px]] [[File:wave-esc-setup2.png|550px]]

After Saving the settings you can repower the Spirit unit and from then ESC Integration is ready to use.