View source for SpiritW1 Binding/en

<languages/>

=4 Binding Procedure =

In order to Bind Spirit W1 or Spirit W3 with your Wave radio use supplied Bind plug.

#Insert '''Bind plug''' at the '''SYS port''' and connect Power supply to the Spirit W1/W3 unit. You can connect BEC or 1-3S Battery at the '''THR, AUX, T1''' ports.
#Spirit W1 unit will start to blink with the Status LED periodically.
#Then power up your Wave radio.
#Radio will automatically bind to the receiver when using new Model profile. You can also Bind anytime manually as described in the section above.
#After successfull binding Spirit unit will stop blinking and will initialize. Then you can remove the Bind plug.

[[File:spritW1-bind.jpg|class=halfwidth|center]]

== Manual Binding ==
You can Bind manually by going to the '''Model/Receiver''' menu.
Press the '''Bind button''' after powering up Spirit W1/W3 with a Bind plug.

[[File:wave-bind.png|480px|center]]

<div class=noprint>
---- 
{|style="width: 100%;color: white;"
|-
| style="width: 33%;"| [[SpiritW1 Wiring|&larr; Wiring]] 
| style="width: 33%;text-align:center;"| [[#up|&uarr;Up&uarr;]]
| style="text-align:right;" | [[SpiritW1 Setup|Configuring from Radio &rarr;]]
|}
----
</div>