Difference between revisions of "Avian Telemetry"
(Marked this version for translation) |
|||
| Line 26: | Line 26: | ||
Make sure you have Throttle Channel assigned in the '''General/Channels''' window. It is recommended to set '''Channel 1''' for Throttle. | Make sure you have Throttle Channel assigned in the '''General/Channels''' window. It is recommended to set '''Channel 1''' for Throttle. | ||
| + | <!--T:34--> | ||
Then set ESC Telemetry in the Spirit Settings software.</translate> | Then set ESC Telemetry in the Spirit Settings software.</translate> | ||
Latest revision as of 13:14, 6 June 2024
Spektrum Avian ESCs are able to provide full telemetry through a single connection of the ESC throttle cable. The same cable is used to transfer throttle signal back to the ESC. The transmission is bi-directional.
Contents
1 Interfacing
1.1 Spirit GT, Spirit GTR, Spirit W1
Connect the ESC Throttle cable at the CH0 port. This port is no longer used for a Swashplate servo.
2 Spirit Settings
Power up the model and start the Spirit Settings as usually.
2.1 Telemetry activation
Make sure you have Throttle Channel assigned in the General/Channels window. It is recommended to set Channel 1 for Throttle.
Then set ESC Telemetry in the Spirit Settings software.
Go to the Advanced/Telemetry settings and set the Spektrum Avian option.
Then close the window and save the settings (CTRL+S). Finally, reconnect battery from the ESC.
From this moment, everything should work.
3 Displaying telemetry data
You can display telemetry data directly in your radio from now.
How to display the data is described in the integration guides:
