TelMe telemetrie

Telemetrie s regulátory Kontronik využívá speciální 5-pinový konektor pro přenos dat. Pro fungování TelMe telemetrie je nezbytné aktualizovat regulátor na verzi alespoň 1.13. Starší verze protokol TelMe nepodporují.

1 Telemetrická propojka

Telemtrické data je možné přenášet skrze speciální propojku Telem KONTRONIK v2. Je dostupná na našem Eshopu.

We do not recommend to make this cable at home since improper connection will cause permanent damage of the unit.

2 Zapojení

Zapojte kablík telemetrie do primárního portu pro Spektrum satelit. U menších jednotek Spirit se použije nativní port pro satelit Spektrum (μSpirit - SAT port).

5-pinový JST konektor propojky Telem KONTRONIK v2 zapojte do regulátoru. V případě, že se jedná o model KOSMIK, lze zvolit kterýkoli port.

3 Spirit Settings

Power up the ESC and start the Spirit Settings as usually.

3.1 Telemetry activation

As the last step you have to set the ESC Telemetry in the Spirit Settings software.

Go to the Advanced/Telemetry settings and set the Kontronik TelMe option.

Then close the window and save the settings (CTRL+S). Finally, reconnect battery from the ESC.

From this moment, everything should work.

4 Displaying telemetry data

You can display telemetry data directly in your radio from now.

How to display the data is described in the integration guides:

• JETI Duplex
• FrSky Taranis & Horus
• Graupner HoTT
• Spektrum Integration
• Futaba Telemetry

5 Supported models

Model	Battery Voltage	Battery Current	BEC Voltage	Consumed Capacity	ESC Temperature	RPM
KOLIBRI 140 LV	✔	✔	✔	✔	✔	✔
JIVE PRO 80+ HV	✔	✔	✔	✔	✔	✔
JIVE PRO 120+ HV	✔	✔	✔	✔	✔	✔
KOSMIK 160 HV	✔	✔	✔	✔	✔	✔
COOL KOSMIK 160 HV	✔	✔	✔	✔	✔	✔
KOSMIK 200 HV	✔	✔	✔	✔	✔	✔
COOL KOSMIK 200+ HV	✔	✔	✔	✔	✔	✔
COOL KOSMIK 200 HV GOLD	✔	✔	✔	✔	✔	✔