Castle Telemtria
A Castle Creations ESC-je rendelkezik egy Link Live nevű funkcióval. Ez lehetővé teszi a kétirányú adatátvitelt a gáz vezetéken keresztül. Az ESC telemetria engedélyezéséhez először engedélyezni kell ezt a funkciót. Alapértelmezés szerint le van tiltva. Ha engedélyezve van, akkor szükséges, hogy egy készülék, amely gáz adatokat küld (ez a Spirit egység), támogatta ezt az átvitelt is. Más esetekben a gáz jelét figyelmen kívül hagyják.
Contents
1 ESC konfiguráció
A Castle Link felület használatával indítsa el a Castle Link szoftvert az ESC konfigurációs beállításainak megnyitásához. Itt engedélyeznie kell a Link-Live feature alkalmazást.
2 Telemetry Cable
To allow the telemetry data transmission Telem CC cable is required. This cable is available in our Eshop.
For Experts: Alternatively you can modify your current Throttle cable by adding 10kOhm resistor between white (signal) and red (+) wires. In this case the Telemetry cable is not required.
3 Interfacing
Connect the Telemetry cable to the AUX(1) port in the unit, where you normally connect the Throttle cable of the ESC. Connect the Throttle cable to the end of the Telem CC cable.
4 Spirit Settings
4.1 Throttle Assignment
Once cable is connected, it is absolutely necessary to assign the Throttle (if not assigned yet).
Power up the ESC and start the Spirit Settings as usually.
Go to the General/Channels and assign a channel to the Throttle.
4.2 Telemetry activation
As the last step you have to set the ESC Telemetry in the Spirit Settings software.
Go to the Advanced/Telemetry settings and set the Castle Creations Phoenix & Talon option.
Then close the window and save the settings (CTRL+S). Finally, reconnect battery from the ESC.
From this moment, everything should work.
5 Displaying telemetry data
You can display telemetry data directly in your radio from now.
How to display the data is described in the integration guides:
6 Supported models
Model |
Battery Voltage |
Battery Current |
BEC Voltage |
Consumed Capacity |
ESC Temperature |
RPM |
---|---|---|---|---|---|---|
Phoenix Edge 50 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge 75 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge 100 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge 130 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge HV 40 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge HV 80 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge HV 120 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge HV 160 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge HVF 160 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge Lite 50 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge Lite 75 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge Lite 100 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge Lite 130 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge Lite HV 40 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge Lite HV 80 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge Lite HV 120 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Edge Lite HV 160 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Phoenix Talon 15 | ✔ | x | ✔ | x | ✔ | ✔ |
Phoenix Talon 25 | ✔ | x | ✔ | x | ✔ | ✔ |
Phoenix Talon 35 | ✔ | x | ✔ | x | ✔ | ✔ |
Phoenix Talon 90 | ✔ | x | ✔ | x | ✔ | ✔ |
Phoenix Talon HV 120 | ✔ | x | ✔ | x | ✔ | ✔ |
Consumed Capacity is calculated from the Current Consumption.