HobbyWing V5 Telemetry/de

HobbyWing Platinum V5 ESC hat eine Telemetriefunktion im Programmieranschluss integriert. Dies ermöglicht die Telemetrie-Datenübertragung zum Gerät.

1 Telemetriekabel

Um die Telemetrie-Datenübertragung zu ermöglichen, ist das Telem UNI Kabel erforderlich. Dieses Kabel ist in unserem Eshop erhältlich.

We do not recommend to make this cable at home since improper connection will cause permanent damage of the unit. The Red wire must be internally disconnected always!

2 Interfacing

Connect the Telemetry cable to the primary Spektrum satellite port (SAT1) in the unit - apply for Spirit 2, Spirit RS, Spirit Pro, Spirit GT, Spirit GTR.

There is no support for Spirit v1 units.

Der Servo-Anschluss des Telem UNI-Kabels sollte an den ESC-Programmieranschluss (P) angeschlossen werden.

3 Spirit Settings

Schalten Sie den ESC ein und starten Sie die Spirit-Einstellungen wie gewohnt.

3.1 Telemetry activation

As the last step you have to set the ESC Telemetry in the Spirit Settings software.

Go to the Advanced/Telemetry settings and set the HobbyWing Platinum V5 option.

Then close the window and save the settings (CTRL+S). Finally, reconnect battery from the ESC.

From this moment, everything should work.

4 Displaying telemetry data

You can display telemetry data directly in your radio from now.

How to display the data is described in the integration guides:

• JETI Duplex
• FrSky Taranis & Horus
• Graupner HoTT
• Spektrum Integration
• Futaba Telemetry

HobbyWing ESC can transmit Current and Consumed Capacity only when there is a load. Without main blades it will show zero value..

5 Supported models

Model	Battery Voltage	Battery Current	Consumed Capacity	ESC Temperature	RPM
Platinum 150A V5	✔	✔	✔	✔	✔

Consumed Capacity is calculated from the Current Consumption.