Difference between revisions of "Updating Spirit unit"
From Spirit System Manual
| Line 13: | Line 13: | ||
#After flashing you can wait until unit will boot up, close the software and open it again. | #After flashing you can wait until unit will boot up, close the software and open it again. | ||
| − | [[File:spirit-update.png| | + | [[File:spirit-update.png|550px]] |
== In case of a problem == | == In case of a problem == | ||
Revision as of 12:55, 11 July 2022
Spirit unit can be updated easily in the Spirit Settings software.
Please download the latest Spirit Settings software from Spirit System Download section first.
1 Updating process
- Start the Spirit unit normally - all servos, battery, ESC can remain plugged in as usually.
- Launch the Spirit Settings software - a dialog window about version mismatch can popup.
- Go to the Update tab.
- You can select which firmware should be downloaded from the Firmware List. By default the latest one is selected.
- Press the Flash button.
- Flashing should start immediately and should not take more than one minute.
- After flashing you can wait until unit will boot up, close the software and open it again.
2 In case of a problem
If flashing will not start or fail for whatever reason, you can perform Recovery process. In that case please proceed according Flashing Failed page.
